Dubai · Guide for filmmakers, photographers and beauty brands

One Light Setup for Beauty Video: Placement, Modifiers, Moving It Scene by Scene and Using the Sun in Dubai

Most beauty video needs one good light in the right place. How to choose it, where to put it and how to carry it through a shoot, with a Code8 campaign lit by a single Aputure 300D.

Words and camera
Joshua Swain
Published
Reading time
8 min
Filed under
Guide
One light beauty low key red lip

In brief

  1. The Kelly Rutherford x Code8 campaign is the clearest example in this portfolio.
  2. The Aputure 300d family are daylight-balanced LED lights with a Bowens mount, which matters more than the wattage: the Bowens mount means the same head takes a softbox, a lantern, a dome or a Fresnel.
  3. These are the four placements that cover almost every beauty shot, and what each one does to a face on camera.
  4. On a one-light shoot you don't build a new setup for every room.
  5. Outdoors, the sun is already a single hard source, and in Dubai it is a very strong one.
Contents 10 sections
  1. 01A beauty campaign lit with one light
  2. 02The light and the modifier
  3. 03Where to put the one light
  4. 04One light, moved scene by scene
  5. 05When the sun is your one light
  6. 06When one light isn't enough
  7. 07Before a one-light beauty shoot
  8. One light, and its limits
  9. Questions
  10. Sources

Most beauty video doesn't need a truck of lights. It needs one good source in the right place, a frame that hides everything else, and a room that does the rest. This guide shows how to build a one-light beauty setup for video: which light and modifier, where to put it, how to move it between scenes, how to use the sun the same way outdoors in Dubai, and when one light stops being enough. The worked examples are real: a Code8 Beauty campaign with Kelly Rutherford lit with a single Aputure 300D, and two-light fashion and beauty shoots in Dubai.

One light is not a budget decision. It's a decision about where the face is, and what the room can do for you.

Behind the scenes of the Kelly Rutherford x Code8 shoot: one large round soft light, a gimbal and the talent at the lipstick bar
Kelly Rutherford x Code8, behind the scenes: one round soft source, one gimbal

A beauty campaign lit with one light

The Kelly Rutherford x Code8 campaign is the clearest example in this portfolio. It was filmed on a Sony A9 Mark III with the Sony 28-70mm f2, with all movement on a DJI RS4 Pro gimbal, and the entire shoot was lit with one Aputure 300D. It took place in a hotel setting in London, was completed in three hours, and the full edit was done in one day. The concept was "beauty, but simple", so a minimal light plan wasn't a compromise; it matched the brief.

ElementKelly Rutherford x Code8
LightOne Aputure 300D for the whole shoot
Camera and lensSony A9 Mark III, Sony 28-70mm f2
MovementDJI RS4 Pro gimbal
LocationA hotel setting in London, including a bar
TimeThree hours to shoot, one day to edit

The reason it works is simple. With one source there is one set of shadows, one catchlight and one colour of light on the skin. Nothing fights. Every extra light you add has to be justified by a problem the first one can't solve. The full set-versus-screen breakdown is in the Code8 behind the scenes vs final case study; this guide is about building the setup yourself.

The light and the modifier

The Aputure 300d family are daylight-balanced LED lights with a Bowens mount, which matters more than the wattage: the Bowens mount means the same head takes a softbox, a lantern, a dome or a Fresnel. For beauty, the modifier is the setup. In the behind-the-scenes clip from the Code8 shoot you can see what was on the stand: a large, round, very soft source, close to the talent.

01

Big and close

A light source looks softer the larger it is relative to the face. A big round modifier a short distance from the talent wraps the cheeks and gives a soft edge to every shadow.

02

Round catchlights

Round modifiers put a round highlight in the eyes. In close-ups that small detail reads as a natural, expensive beauty look.

03

Daylight in mixed rooms

A daylight source sits cleanly against window light. Indoors at night, warm practical lamps will glow orange behind it, which can be exactly the look you want.

04

Battery or mains

On location, check the power before the day. A single light on a battery plate is quicker to move between rooms than one tied to a wall socket.

1

Where to put the one light

A single large round softbox lighting an empty stool in a small studio, a camera on a tripod beside it
Illustration: a one-light set-up with a large round softbox.

With a single source, position is everything. These are the four placements that cover almost every beauty shot, and what each one does to a face on camera.

PlacementWhat it doesUse it for
Near the lens, a little above eye levelEven, flattering skin, a small shadow under the nose and chinProduct on skin, application close-ups, talking to camera
About 45 degrees to one sideShape in the cheekbone and jaw, one side falls a little darkerHero portraits, slow push-ins, the "campaign" frame
Side on, 90 degreesHalf the face lit, strong texture and dramaProfiles, night scenes, a moodier cutaway
Behind and to the sideA rim on hair and shoulders, the face mostly in shadowSilhouettes and transitions, used sparingly in beauty

Two things make a single light behave like a bigger setup. First, negative fill: a black flag or a dark wall on the shadow side keeps the face from going flat in a white room. Second, bounce: a white or silver card under the chin lifts the eyes without adding a second light. Neither of them needs power.

One light, moved scene by scene

Kelly Rutherford at a hotel bar with the single soft light just out of frame to the side, Code8 behind the scenes
The bar set-up: the edge of the soft source is just visible at the top right of the frame.

On a one-light shoot you don't build a new setup for every room. You pick the light up and carry it. In the Code8 behind-the-scenes Short, the bar scene is described as shot from the side for a more dramatic look. In the frame above you can see how little that takes: the same round source, pulled round to the side of the bar, with the warm lamps of the room left to glow behind her.

Kelly Rutherford in profile at the bar, warm side light and glowing lamps behind, Code8 campaign
The result: side light on the profile, the room's own lamps doing the background.

1. Plan the scenes in the order the light can travel, so you move it once per room, not back and forth.

2. Light the face first, then choose the camera angle that hides the stand.

3. Keep the same modifier all day. Changing the shape of the source changes the look of the campaign.

4. Use the location's practical lamps as your second and third lights. They cost nothing and they're already in the right colour for the room.

5. Shoot tighter when the room fights you. A close-up only needs the face lit.

Kelly Rutherford smiling in a soft-lit close-up from the Code8 Beauty campaign
A close-up from the same shoot: soft light on the face, the background left to fall away.

When the sun is your one light

Damas x Dome shoot in a Dubai palace garden: crew carry a large white frame beside the model in an orange gown while the camera follows Camera operator on a stabilised rig in a Dubai palace garden with a large white frame behind, Damas x Dome behind the scenes

Damas x Dome, Dubai: the sun is the light, and a large white frame travels with the model.

Outdoors, the sun is already a single hard source, and in Dubai it is a very strong one. The same thinking applies: one source, shaped. On the Damas x Dome shoot in Dubai, the behind-the-scenes film shows the crew in a palace garden carrying a large white frame alongside the model in her orange gown, while the operator follows on a stabilised camera rig. Whether it is used to bounce or to shade, a frame like that does outdoors what a modifier does indoors: it shapes the one light you have.

01

Diffuse or bounce

A frame of diffusion between the sun and the face softens it; a white frame on the shadow side bounces it back. Either way, it's still one light.

02

Shoot early or late

Overhead sun puts dark shadows in the eye sockets. Low sun comes from the side, which is the 45-degree key from the table above, for free.

03

Window light counts

A big window is a huge soft source. Put the talent side-on to it, and use a white card on the far side as fill.

04

Plan for the heat

Between May and September, outdoor beauty work in Dubai moves to early mornings and indoor sets. Make-up and talent need shade between takes.

For the heat side of the plan, read shooting in Dubai's summer heat; for the locations themselves, where to shoot fashion and beauty in Dubai.

When one light isn't enough

One light is the right answer for faces and close-ups. It gets harder when the frame gets wider and the talent moves a lot. The Celine Winter '22 "Dans Paris" film, made in Dubai for Savoir Flair, is a good example of the next step up: two Aputure 300D lights, each with double diffusion, on a clean, pale set, filmed handheld on a Sony FX3 with an 85mm. Two big, soft sources lit a whole area rather than a single mark, so the model could walk, sit and turn while the camera followed. The breakdown is in the Celine fashion film lighting case study.

SituationOne lightAdd a second
Beauty close-ups, product on skinYesOnly a bounce card
Talking to cameraYes, near the lensIf the background is too dark to read
Full-length looks, walking talentHardYes, to light an area, not a mark
A white studio with a shade rangePossibleUsually, plus flags, so every skin tone is recorded the same way
Night exteriorsYes, as a hard side lightLet street and pool lights be the rest

Before a one-light beauty shoot

1. Choose the modifier first: big and round for skin, smaller and harder for drama.

2. Pack a black flag and a white or silver bounce. They are your fill and your shape.

3. Write the shot list in the order the light will move through the location.

4. Fix the white balance for the light, not the room, and keep it for the whole day so skin stays consistent.

5. Check power, or bring batteries, for every room you plan to use.

6. In Dubai, check the venue's permission and whether the shoot needs a permit before you book the crew.

Hiring someone for this kind of work? The questions to ask are in how to hire a beauty photographer or videographer in Dubai.

One light, and its limits

Questions

Can you light a beauty video with one light?

Yes. The Kelly Rutherford x Code8 campaign was lit entirely with one Aputure 300D, moved from scene to scene, with the framing kept tight so the location did the rest. One big soft source near the face, plus a flag and a bounce card, covers most beauty close-ups.

Where should I put one light for a beauty shot?

For even, flattering skin, put a large soft source near the lens and a little above eye level. For more shape, move it to about 45 degrees. Side-on light gives drama and texture. Add a white card under the chin to lift the eyes.

What modifier is best for one-light beauty video?

A large soft modifier, close to the talent. Big round sources such as lanterns, domes and deep softboxes wrap the face and give round catchlights in the eyes. A Bowens-mount light like the Aputure 300d takes all of them.

When do you need more than one light?

When the frame gets wide and the talent moves, or when a whole shade range has to look identical. The Celine Winter '22 film in Dubai used two Aputure 300D lights with double diffusion so the model could move freely on a clean set.

Sources

  1. Aputure, LS 300d II product page and specifications ↩

ShareLinkedInXEmail

Work with SwainUK

Planning a beauty shoot?

Beauty film and stills for brands, make-up artists and clinics, lit for real skin and delivered for every format you post.

Start a shootView the project

All guides and case studies