Dubai · Guide for photographers, filmmakers and watch brands

Watch Photography and Video: Setting 10:10, Lighting the Crystal and Filming Watches on the Wrist

A watch is jewellery with a face. How to prepare it, light the crystal and dial, film it on the wrist and in a story, with a Vogue Arabia day in Dubai and a Jacob & Co film.

Words and camera
Joshua Swain
Published
Reading time
7 min
Filed under
Guide
Dubai skyline night balcony watch shoot

In brief

  1. Most watch shots are won or lost before the light goes on.
  2. A watch has three surfaces that want different light, and you usually can't give all three what they want in one frame.
  3. The Oddity Magazine film with Anish Bhatt (Watch Anish), published on the SwainUK YouTube channel in 2019, is built almost entirely from wrist close-ups against dark, low-key backgrounds.
  4. The Piaget x Vogue Arabia Extraordinary Women shoot itself is covered in the behind the scenes case study.
  5. A slow slider or gimbal move past a small hard light makes a sunburst dial and bezel stones come alive.
Contents 9 sections
  1. 01Before the watch goes in front of the lens
  2. 02Lighting the crystal, the dial and the case
  3. 03Close-ups that sell the watch
  4. 04The watch inside an editorial or campaign day
  5. 05Camera settings and movement for watch films
  6. 06What a watch shoot should deliver
  7. Watch and jewellery films
  8. Questions
  9. Sources

Watch photography sits between product and jewellery work: a small object with a curved crystal that mirrors everything, a dial that changes with every degree of light, and a strap that has to look right on a real wrist. This guide covers preparing the watch, lighting the crystal and dial, filming it on the wrist and in a story, and the shots a watch shoot should deliver, with a Vogue Arabia day in Dubai and a Jacob & Co film for Oddity Magazine as worked examples.

A watch is jewellery with a face. Set the hands, clean the crystal, then light the room it reflects.

Balqees Fathi at a lit make-up mirror wearing a watch and diamond necklace, filmed past the camera rig on a Vogue Arabia shoot in Dubai
Balqees Fathi on a Vogue Arabia shoot in Dubai

Before the watch goes in front of the lens

Most watch shots are won or lost before the light goes on. Close-ups magnify every speck of dust on the crystal and every scratch on a polished case, and a wrong time on the dial is something every watch enthusiast notices.

01

Set the hands to 10:10

The classic advertising time frames the logo between the hands, keeps them from overlapping and gives the dial a symmetrical, smiling shape. Check what the brand prefers before you start.

02

Clean, then glove up

Microfibre cloth for the crystal and case, a blower for dust, cotton gloves from then on. Remove any protective film from the case back and clasp.

03

Size the strap

A bracelet that slides around the wrist turns the dial away from camera every few seconds. Fit it to the wearer before the shoot, not on set.

04

Cast the wrist

On the wrist, skin, nails and cuffs are part of the product. Brief the talent on manicure, and bring sleeves in a few colours so the case has a clean frame.

12

Lighting the crystal, the dial and the case

A watch has three surfaces that want different light, and you usually can't give all three what they want in one frame. Decide which one the shot is about.

SurfaceThe problemWhat works
CrystalA domed or flat sapphire crystal reflects the softbox, the camera and you, and hides the dial behind glareBlack cards around the watch, the camera behind a card, a polariser rotated until the glare drops, or a slight tilt of the watch
DialSunburst, guilloché and lacquered dials change colour and pattern with the angle of lightA large soft source at a low angle; on video, a slow move so the pattern travels across the dial
Case and braceletPolished steel and gold show the whole room as hard blocks of white and blackLarge gradients from diffusion close to the metal, white cards for highlights, black cards for edge definition
Stones on the bezelWith only soft light, diamonds and sapphires look greyOne or two small hard lights for sparkle, kept off the crystal

This is the same thinking as lighting jewellery: you light what the watch reflects, not the watch itself. The techniques, including cross-polarisation, are covered step by step in jewellery photography without reflections.

Close-ups that sell the watch

Jacob and Co Opera Godfather watch on a wrist above a white shirt cuff and checked jacket sleeve Hand resting over a wristwatch on a forearm, close-up for Oddity Magazine

Watch Anish x Oddity Magazine: the Jacob & Co Opera Godfather Edition on the wrist, and a hand resting over a watch.

The Oddity Magazine film with Anish Bhatt (Watch Anish), published on the SwainUK YouTube channel in 2019, is built almost entirely from wrist close-ups against dark, low-key backgrounds. The Jacob & Co Opera Godfather Edition appears above a crisp white shirt cuff and a checked jacket sleeve, and other close-ups show a hand resting over a watch on the forearm. Those are the shots to copy for any watch on a person:

01

The cuff frame

A white or pale cuff under the case separates it from the jacket and gives the eye a clean border. It's the oldest trick in watch photography because it works.

02

A gesture, not a pose

Adjusting a cuff, resting a hand on the watch, turning the wrist: natural actions bring the dial to camera without looking staged.

03

Dark backgrounds

A low-key background keeps reflections in the crystal to a minimum and lets polished metal stand out.

04

Focus on the dial

At close range depth of field is thin. Put the focus on the hands and the logo; let the wrist fall off.

The watch inside an editorial or campaign day

Balqees Fathi laughing on a sofa, a gold watch on her wrist, Vogue Arabia shoot in Dubai Model's hand with gemstone rings raised beside a stone bust, Damas Jewellery campaign in Dubai

Balqees Fathi laughing on the sofa in Dubai, a watch on her wrist · hands styled with rings beside a stone bust for Damas Jewellery.

Not every watch shot is a macro. In make-up artist Ido Raphael's Dubai film, shot handheld on a Sony A7S III and mixing in moments from SwainUK's Piaget x Vogue Arabia shoot with singer Balqees Fathi, the watch shows up in moments rather than poses: a hand lifted to an earring at the make-up mirror, a wrist on the knee during a laugh on the sofa, hands at the collar on a balcony at night. The Piaget x Vogue Arabia Extraordinary Women shoot itself is covered in the behind the scenes case study.

For brands, that is the point of putting a watch into an editorial: it reads as part of a person's life. For the crew, it means the watch has to be ready all day, cleaned between set-ups and set to time, because the best gesture might happen between takes. Ask the talent to keep the watch on the outside of the sleeve, and watch the monitor for moments where the dial turns to camera.

Camera settings and movement for watch films

Production monitor showing 25 fps, 180 degree shutter, EI 800, ND 0.6 and 5600K on a Vogue Arabia set in Dubai
The production monitor on the Vogue Arabia set: 25 fps, a 180° shutter, EI 800, ND 0.6 and 5600K.

The monitor on that set shows a sensible baseline for a watch or jewellery film: 25 frames per second with a 180° shutter for natural motion blur, a moderate exposure index, ND filtering to keep the aperture where you want it, and a fixed 5600K white balance so the metal doesn't shift colour from shot to shot. From there:

01

Slow moves past light

A slow slider or gimbal move past a small hard light makes a sunburst dial and bezel stones come alive. Static shots of a watch often look like stills.

02

High frame rate for the details

Shooting the turn of a wrist or a bracelet clasp closing at a high frame rate gives smooth slow motion for the edit.

03

Lock the white balance

Steel, white gold and yellow gold must match across shots. Auto white balance will drift as the frame changes.

04

Watch for the second hand

In a cut, a jumping second hand gives away the order of shots. Note the time on each take, or stop the watch for close-ups if the brand allows.

Shooting at night in Dubai, a lit skyline makes a beautiful background, but it also shows up in the crystal. Turn the watch until the city sits in the background rather than on the dial. In summer, moving from an air-conditioned room to a humid balcony can fog both the lens and the crystal: give both time to acclimatise, as explained in shooting in Dubai's summer heat.

What a watch shoot should deliver

Luxury steel wristwatch on black marble with a single softbox reflection across the crystal
Illustration: a wristwatch lit with one long reflection.

1. Packshot: the watch at 10:10, front on, on white and on black.

2. Three-quarter: case profile, crown and bezel.

3. Details: dial texture, hands, logo, the case back, the clasp.

4. Movement: a macro through the crystal or case back if the watch shows it.

5. On the wrist: with a cuff, a gesture, and a pull-back so people can judge the size.

6. In a story: the watch in a real moment, on talent, on location.

7. Social cuts: 9:16 versions of 3, 5 and 6, plus a few seconds of slow motion.

Watches are often shot alongside jewellery, and the styling has to agree: on a Damas Jewellery campaign in Dubai, the model's hand carries three gemstone rings, with coloured stones at the ears picking up the same palette. If rings, bracelets and a watch share a wrist, decide which is the hero and keep the others quieter. For how those campaigns were planned, see the Damas jewellery campaign case study, and before shooting on location check the Dubai photoshoot permit guide.

Watch and jewellery films

Questions

How do you photograph a watch without reflections?

Control what the crystal sees: surround the watch with black cards, hide the camera behind a card, tilt the watch slightly, and use a polariser to cut glare on the crystal. Use large diffused light close to the case for clean gradients on polished metal.

Why are watches set to 10:10 in photos?

At 10:10 the hands frame the logo, don't overlap and form a symmetrical shape that reads like a smile. Research has linked it to a more positive response from viewers, which is why most brands use it.

How do you film a watch for social media?

Shoot vertical close-ups with slow moves past a small hard light so the dial and stones catch it, add slow-motion details like a wrist turn or a clasp closing, and include the watch on a person in a natural gesture so viewers can judge its size.

What camera settings are best for watch videos?

A common baseline is 25 fps with a 180° shutter, ND filters to hold the aperture you want, and a locked white balance so steel and gold stay consistent between shots. Use a high frame rate for details you want in slow motion.

Sources

  1. PetaPixel, why watches are set to 10:10 ↩
  2. Gear Patrol, why watch hands are set to 10:10 ↩

ShareLinkedInXEmail

Work with SwainUK

Planning a shoot like this?

Commercial film and photography in London and Dubai: concept, crew, lighting, shoot and edit, from one team.

Start a shootSee the portfolio

All guides and case studies